a
Subscribe to our Newsletter!JVG Sound, Lighting & Visual
JVG Sound | News
 

 

How to take the headache out of complying with decibel levels limits

Nightclubs and venues are currently being targeted as part of a campaign to examine compliance of the Workplace Health & Safety Act dealing with Decibel Levels.  Over the last 12 months, 15 venues on the Gold Coast alone, have lost their operating licence because they did not comply with the required standards.
The good news is - setting and managing your decibel levels,  has never been easier!  JVG Sound has a range of processed audio products to automate and manage decibel limits to suit every budget.

Venues with Multiple Music Zones

Most venues have a DSP system running straight from the source or amplifier.  Ideally, you need processed audio that runs through all the music zones.  Processed audio systems with Real Time Clocks need to be in a digital format  to allow you to set compression limits for different zones,  programmed to automatically deploy at designated times and decibel levels. 

For example, you can use Processed Audio to program the following solution:

Daytime:         Level limit set to 80Db
6pm to 9pm:    Increase the  limit to 100Db
9pm to 1am:    Ramped up to 110Db
1am:               Limit dropped down to 85Db

The real benefits of Processed Audio are non-tangible and translate into productivity improvement and reduced exposure to risk to be fully appreciated.   Processed audio systems mitigate risk through automation of decibel levels and consequently reduces exposure to penalties under OHS Regulations.

The latest Processed Audio Products:

Media Matrix - Nion
The very latest digital technology utilising software driven signal processing including mixing, equalization, limiting/compression, delays, feedback control, distribution and much more. Front panel control pre-sets for simplicity of operation or complete computer control/programming.


London BSS
London provides more flexible and enhanced I/O configurations, dual-redundant audio networking with greater network capacity and matrix sizes, more efficient DSP using Analog Devices SHARC processors, and a new core system design package written completely from the ground up, plus integration of control, monitoring and error reporting of Crown Audio's CTs Series.

Bose Control Space
Control Space systems deliver a powerful, flexible, sophisticated DSP solution for any project large or small, simple or complex.
 



DBX Drive Rack
Time alignment delay, compressors/limiter on every output, 4 inputs and outputs, multi level security system, triple redundant backup, and electronically balanced.
 
 
 
Nexia Biamp
When Biamp launched the Nexia line, it was hailed as one of the coolest products of the year. The entire Nexia lineup is designed with a network-friendly open architecture to help create economical, intuitive solutions. You’ll save time, effort and, ultimately, money.

For smaller venues and clubs who don’t have DSP, if you are looking to upgrade your system, or looking for an easy way to manage decibel limits, our JVG technicians can implement a cost effective solution to meet your budget. 

Acoustics Report Assessment

JVG Sound can also check your acoustics report to assess if your sound system meets compliant OHS levels.  Call us on 1300 584 584 to book in your acoustics check.

 

For  ideas on lighting, audio system design, installation and service, contact JVG Sound on:

JVG Sound, Lighting and Visual:  1300 JVG JVG | 1300 584 584


 

http://www.jvgsound.com.au  |  sales@jvgsound.com.au






 

 

Website Designed by GCweb